The Klipsch KPT-1802-HLS cinema subwoofer uses a patented, horn-loaded vented cabinet design with an 18” driver, resulting in class-leading acoustic output combined with commanding sub-20Hz bass response previously unattainable from even a 21” driver configuration system.
The KPT-884-SW is a high output bass-reflex cinema subwoofer that features an advanced low-frequency 4-inch voice coil driver design. Less than 23 inches in depth this system utilizes a single 18-inch driver that gains its high efficiency through the use of large geometrically optimized structures and light-weight cones. In fact the KPT-884-SW is capable of delivering an earth-shaking low frequency of 18Hz.
The KPT-418-SW is a high-output bass-reflex subwoofer system delivers true bottom-end performance along with high power handling capability and high efficiency.
An ideal subwoofer for back-of-house bass reinforcement without taking up valuable seating space, the KPT-684-SW-SMA increases the flexibility of the KPT-684 with the addition of strong, aluminum internal bracing, four main fly points (cabinet top) and safety fly point inserts (both sides) for horizontal suspension.
The KPT-684-SW is a high output bass-reflex subwoofer featuring advanced low-frequency driver design.
The KPT-305 is utilized as a mid-bass device in the 4-way fully horn-loaded KPT-MCM-4-Grand and the KPT-745. It augments the low frequency sections of these speaker systems for effortless, distortion free bass in large auditoriums. It replaces the former KPT-XII.
The Klipsch SB-7 mounting bracket is designed to operate with all Klipsch Cinema Surround speakers with a 2.75” (6.9cm) by 5” (12.7cm) 4-bolt pattern. Vertical tilt angle plus or minus 15°, in 5° increment
Horizontal swivel option plus or minus 45° continuous, right or left of center.
The Klipsch SB-6 mounting bracket is designed to operate with all Klipsch Cinema Surround speakers with a 2.75” (6.9cm) by 5” (12.7cm) 4-bolt pattern.
Vertical tilt angle choices are 0° or 15° downward.
Perfect for a clean look, the Klipsch SB-9 Low Profile Mounting Bracket is ideal for quick and easy installation. The bracket’s installation is designed to allow for single person installation. The SB-9 bracket is only 2 1/4” deep, resulting in a desirable low profile form. The bracket, made using powder coated 12 gauge structural steel, accommodates a 5” x 2.75” standard VESA mounting hole pattern. The SB-9 wall mounting bracket supports KPT series surrounds up to 80lbs (36.4kg).
Package contents include one wall mounting plate, one speaker mounting plate, two security screws and instruction sheet.
The Klipsch SB-102 U-Shaped mounting bracket is designed to operate with all Klipsch Cinema Surround speakers.